Table of Contents
Advertisement
To Perform File Maintenance:
1. From the
Home
Tools Menu
Note:
If the USB flash drive has not been previously used with the field computer,
touch the
drive.
Note:
The configuration file output icon
type(s) to output to the computer.
2. Select the type of files on which to
perform file maintenance.
3. Select the following icons to
transfer files to the console or a
connected USB flash drive.
From
Console
For example, select Job Files and
From Console to display the Job
Files screen shown to the right.
4. Select a file name from the list and
touch the icon along the bottom of
the screen. The field computer will
perform one of the following actions
to the selected file or file type.
Transfer to USB
All
Selected
Export Slingshot™
Data Package to USB
All
For example, touch the
connected flash drive or select a file name from the list and touch
transfer the selected file to the flash drive.
Updates
Updates for field computer software are available at the Raven Applied
Technology Division web site:
Note:
Refer to the Envizio Pro Series Installation and Operation Manual for
assistance with updating CANbus nodes connected to the field computer.
15
screen, select:
Computer Menu
icon to set up the required file structure on the connected
To
Console
Delete
All
Selected
Selected
www.ravenhelp.com
allows the user to select the file
to transfer all files of the selected file type to the
File Maintenance
to
Advertisement
Table of Contents
