Table of Contents
Advertisement
D. M
:
AINTENANCE
•
Periodically check the motor and control box
electrical connections, remove any residue and
cover the connections with a small coating of grease.
It is recommended at least once a year to
disassemble the windlass (see Fig. 3.16.2) and
remove any residue build-up.
!
DANGER
Make sure that the power is off before any work is
performed on the windlass.
•
Using the emergency handle, unscrew the
clutch
nut
by
counterclockwise.
W
E
INDLASS
MERGENCY
(F
. 3.16.1)
IG
•
Remove the drum, upper cone, chain wheel and
lower cone.
•
Wash down with fresh water and remove any
residue.
•
Coat contact surfaces with a light film of
lubricant.
•
Reassemble the unit and tighten clutch by
turning the handle clockwise.
3.16
S
3 • U
ECTION
turning
the
handle
H
ANDLE
Y
B
SING
OUR
W
(M
INDLASS
AINTENANCE
(F
. 3.16.2)
IG
CLUTCH NUT
DRUM
UPPER CONE
CHAIN PULLEY
LOWER CONE
NOTE: Use the fresh water washdown spigot in
the starboard bow locker to hose down the chain in
the locker after haul-in.
S
C
TARBOARD
HAIN
(F
. 3.16.3)
IG
REFER TO WINDLASS OPERATOR'S MANUAL IN
YOUR OWNER'S PACKET FOR DETAILED
OPERATING INSTRUCTIONS.
OAT
P
)
ROFILE
EMERGENCY HANDLE
L
OCKER
FRESH WATER
WASHDOWN
52 Sundancer
®
(525 Sundancer
®
)
Advertisement
Table of Contents
