Table of Contents
Advertisement
B. T
O
F
O
PERATE
ROM THE
•
Make sure that the safety lanyard is removed
from the anchor chain.
•
Turn the WINDLASS MAIN switch ON at the
control station.
•
Lift protective cap on foot switches and depress
UP or DOWN switch for the desired result.
C. T
O
M
O
PERATE
ANUALLY
•
Make sure that the safety lanyard (see Fig. 3.7.3)
is removed from the anchor chain.
•
Insert the emergency handle into the clutch nut
(see fig 3.7.4)
•
Turn handle clockwise to retrieve anchor.
W
(M
INDLASS
AINTENANCE
(F
. 3.8.1)
IG
CLUTCH NUT
DRUM
UPPER CONE
CHAIN PULLEY
LOWER CONE
3.8
S
3 • U
ECTION
B
:
OW
:
P
)
ROFILE
EMERGENCY HANDLE
Y
B
SING
OUR
D. M
:
AINTENANCE
•
Periodically check the motor and control box
electrical connections, remove any residue and
cover the connections with a small coating of
grease.
!
Make sure that the power is off before any work is
performed on the windlass.
It is recommended at least once a year to
disassemble the windlass (Fig. 3.8.1) and remove
any residue buildup.
•
Using the emergency handle, unscrew the
clutch
nut
counterclockwise.
•
Remove the drum, upper cone, chain wheel and
lower cone.
•
Wash down with fresh water and remove any
residue.
•
Coat contact surfaces with a light film of
lubricant.
•
Reassemble the unit and tighten clutch by
turning the handle clockwise.
REFER TO WINDLASS OPERATOR'S MANUAL IN
YOUR OWNER'S PACKET FOR DETAILED
OPERATING AND MAINTENANCE INSTRUCTIONS.
OAT
DANGER
by
turning
the
handle
270 Select EX
Advertisement
Table of Contents
