B. T
O
O
PERATE FROM THE
•
Make sure that the safety lanyard is removed
from the anchor chain.
•
Lift protective cap on foot switches and depress
UP or DOWN switch for the desired result.
C. T
O
M
O
PERATE
ANUALLY
•
Make sure that the safety lanyard (see Fig. 3.7.3)
is removed from the anchor chain.
•
Insert the emergency handle into the clutch nut
(see fig 3.7.4)
•
Turn handle clockwise to retrieve anchor.
D. M
:
AINTENANCE
•
Periodically check the motor and control box
electrical connections, remove any residue and
cover the connections with a small coating of
grease.
!
DANGER
Make sure that the power is off before any work is
performed on the windlass.
It is recommended at least once a year to
disassemble the windlass (see Fig. 3.7.4) and
remove any residue buildup.
•
Using the emergency handle, unscrew the
clutch
nut
by
counterclockwise.
•
Remove the drum, upper cone, chain wheel and
lower cone.
•
Wash down with fresh water and remove any
residue.
•
Coat contact surfaces with a light film of
lubricant.
•
Reassemble the unit and tighten clutch by
turning the handle clockwise.
REFER TO WINDLASS OPERATOR'S MANUAL
IN YOUR OWNER'S PACKET FOR DETAILED
OPERATING AND MAINTENANCE INSTRUCTIONS.
3.8
S
3 • U
ECTION
B
:
OW
:
turning
the
handle
Y
B
SING
OUR
OAT
260 Sundancer
(275 Sundancer
®
)
®