Water Pump & Filters - Sea Ray 52 Sundancer Owner's Manual

S
ECTION
E. W P & F
ATER UMP
W P
ATER UMP
The fresh water system pump and filters are located
below the salon floor hatch. (Figure 7.5.1 and 7.7.1)
The pump is turned on by the FRESH WATER
PUMP breaker on the salon DC distribution panel,
and is also protected by an in-line fuse located at
the pump.
W P P -F
ATER UMP AND RE
(F .7.8.1)
IG
WATER PUMP
SUCTION
WATER PUMP
PRE-FILTER
P -F
RE ILTER
The water system pre-filter is attached to the
water pump located on the aft wall of the salon
floor storage. (Figure 7.7.1) The filter is
attached to the suction side of the pump to filter
any particles before the get to the pump. The
f i l t e r s h o u l d b e c h e cke d a n d c l e a n e d
periodically (Figure 7.8.2).
Before servicing the system, turn the FRESH
WATER PUMP breakers OFF and release
pressure on the system by opening a faucet.
7.8
7 • A
CCESSORIES
ILTERS
ILTER
IN-LINE FUSE
WATER PUMP
WATER PUMP
DISCHARGE
(TO POST-FILTER)
& O
PTIONS
W P F
ATER UMP ILTER
(F .7.8.2)
IG
FILTER SCREEN
O-RING
COVER
P -F
OST ILTER
The post-filter is the large filter located on the
aft wall of the salon floor storage. (Figure 7.7.1)
The filter is situated on the pressure side of
the pump to filter any particles that may have
passed through the pump. The filter should be
checked and cleaned periodically (Figure 7.8.3
thru 7.9.1).
Before servicing the system, turn the FRESH
W AT E R P U M P b r e a ke r O F F a n d r e l e a s e
pressure on the system by opening a faucet.
T C F :
O LEAN THE ILTER
• Unscrew filter body and
remove from the filter cap.
• Replace filter cartridge.
52 Sundancer
BOWL
(F .7.8.3)
IG
(F .7.8.4)
IG
® (525 Sundancer ® )