Safety Precautions - Red Jacket Quick-Set AGUMP33R1 Installation, Operation & Service Manual

Introduction
This manual contains installation, operation, and service information for the Red Jacket 4-inch Standard
Submersible Petroleum and AG pump.

Safety Precautions

The following safety symbols are used throughout this manual to alert you to important safety hazards and
precautions.
This product operates in the highly combustible atmosphere of a gasoline storage tank.
FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS AND SAFETY PRECAUTIONS
COULD CAUSE DAMAGE TO PROPERTY, ENVIRONMENT, RESULTING IN SERIOUS INJURY
OR DEATH.
1. All installation work must comply with the latest issue of the National Electrical Code
OFF
2. Turn off, tag, and lockout power to the STP before connecting or servicing the STP.
3. Before installing pipe threads apply an adequate amount of fresh, UL classified for
4. To protect yourself and others from serious injury, death, or substantial property
5. When servicing unit use non-sparking tools and use caution when removing or
EXPLOSIVE
Fuels and their vapors are extremely
explosive if ignited.
ELECTRICITY
High voltage exists in, and is supplied
to, the device. A potential shock haz-
ard exists.
WARNING
Heed the adjacent instructions to
avoid equipment damage or personal
injury.
WEAR EYE PROTECTION
Wear eye protection when working
with pressurized fuel lines or epoxy
sealant to avoid possible eye injury.
(NFPA 70), Code for Motor Fuel Dispensing Facilities and Repair Garages (NFPA) 30A,
and any national, state, and local code requirements that apply.
petroleum, non-setting thread sealant.
damage, carefully read and follow all warnings and instructions in this manual.
installing equipment to avoid generating a spark.
FLAMMABLE
Fuels and their vapors are extremely
flammable.
TURN POWER OFF
Live power to a device creates a
potential shock hazard. Turn Off
OFF
power to the device and associated
accessories when servicing the unit.
READ ALL RELATED MANUALS
Knowledge of all related procedures
before you begin work is important.
Read and understand all manuals
thoroughly. If you do not understand
a procedure, ask someone who does.
WARNING
1