Changing To A Back Flue Outlet - Heta SCAN-LINE TURIN CLASSIC Operating And Installation Instructions

2.6 Changing to a back outlet
18
Fig. 1
Cut the small metal
bridge connecting
the cover to the back
panel using side cut-
ters. Then twist off
the cover.
Fig. 2
Remove the two
screws that hold the
cover in place on the
stove.
Fig. 3
Remove the cover
from the back outlet.
Fig. 4
Remove the bolts
holding the top flue
outlet.
Fig. 5
Lift the top flue
outlet off the stove.
– only when necessary – Fig. 1-10
Fig. 6
Insert the flue outlet
through the back
panel and place
against the combu-
stion chamber.
Fig. 7
Affix the flue outlet
to the back of the
stove using the bolts
from the top.
Fig. 8
Make sure that the
flue outlet is centred
and then tighten the
bolts.
Fig. 9
Place the cover
from the back outlet
on top of the stove.
Fig. 10
Affix the cover using
the appropriate
bolts.