Trouble Shooting; Replacement Parts - Grizzly ET 3500 Translation Of The Original Instructions For Use

GB

Trouble shooting

Problem
Trimmer vibrates
Trimmer does not
start
Poor cutting per-
formance

Replacement parts

Spare parts and accessories can
be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre via telephone
(see "Grizzly Service-Center").
24
Possible cause
Spool ( 10) is dirty
Spool ( 10) is defective
No mains power
ON / OFF ( 1) switch
defective
Worn carbon brushes
Motor defective
Line spool ( 10) does not
have sufficient line
Line has not been conduct-
ed out of the spool or only
on one side
Remedy
Clean spool (see "Cleaning and
maintenance")
Exchange spool (see "Cleaning and
maintenance")
Check cable, line, plug; repair by
qualified electrician
Repair by After-Sales Service
Lengthen cutting line
(see "Operation")
or exchange spool (see "Cleaning
and maintenance")
Remove spool and lace line through
opening outwards and return spool.