Grizzly ET 3500 Translation Of The Original Instructions For Use page 18

GB
• Do not traverse gravel paths
while the equipment is operating.
• Do not operate the equipment in
the vicinity of inflammable liquids
or gases as this could give rise to
the danger of a fire or explosion.
• Store the equipment in a dry
place that is not accessible to
children.
CAUTION! The following
states how damage to the
equipment and possible injury
to people can be avoided:
Taking care of the equipment:
• Ensure that the ventilation open-
ings are not clogged.
• Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer.
• Never try to repair the equip-
ment yourself. All work that has
not been listed in these Instruc-
tions must only be carried out by
an authorised servicing agency.
• Treat the equipment with the
greatest care. Always keep the
equipment clean for better and
safer work. Follow the mainte-
nance instructions.
• Never overload the equipment.
Always work within the stated
capacity range. Do not use low-
power machines for heavy-duty
work. Do not operate the equip-
ment for purposes for which it is
not intended.
• Always inspect the equipment
before it is to be used. Do not
operate the equipment if safety
devices, parts of the cutting de-
vice or bolts are missing, worn
out or damaged.
18
Electrical safety:
CAUTION! The following
states how to avoid
accidents and injuries due to
electric shock:
• Before each usage, check the
mains power cable and the
extension cable for damage
and signs of aging. Do not
use the device if the cable is
damaged or worn.
• Always keep the extension cable
well away from the cutting tools.
Should the power cable
become damaged during
work, then instantly disconnect
the power cable from the
mains. DO NOT TOUCH THE
POWER CABLE BEFORE IT
HAS BEEN DISCONNECTED
FROM THE MAINS!
• If the power cable for this
equipment is damaged, it
must be replaced by the
manufacturer, a customer
service agent of the same or
a similarly qualified person in
order to prevent hazards.
• Check that the mains voltage
is the same as indicated on the
rating plate.
• Connect the equipment to a
power socked with a residual-
current circuit breaker that has
a rated current of not more
than 30 mA.
• Protect the equipment from
moisture. The equipment must
not be moist nor operated in a
moist environment.
• Always check the equipment,
power cable and plug for
damage before operating the