Storage; Disposal And Protection Of The Environment; Technical Data - Grizzly ET 3500 Translation Of The Original Instructions For Use

GB
4. Thread the two ends of the
thread through the thread outlet
eyes (16) and place the replace-
ment thread reel on the cutting
head (9). Ensure that the spring
(17) is located correctly.
5. Fit the reel cover (15). It clicks in
audibly.
Check the line cutter. Never
operate the trimmer without the
line cutter or if the line cutter is
defective. Replace a defective
thread cutter. Risk of injury.

Storage

• Store the trimmer in a dry place well
out of reach of children.
• Do not expose the trimmer for extend-
ed periods to direct sunlight.
• Do not wrap plastic sacks around the
trimmer as this could result in the for-
mation of moisture and mould.
• Do not stand the trimmer on its pro-
tective cover. Suspend it by its upper
handle in such a manner that the
protective cover does not come into
contact with other objects. This is be-
cause the protective cover could be-
come deformed, thereby changing its
dimensions and its safety properties.
Disposal and protection
of the environment
Dispose of the trimmer, its accessories
and the packaging in an environment-
friendly manner.
Electrical appliances must not be
disposed of with the domestic waste
22
Hand in a redundant trimmer to a recy-
cling centre. The plastic and metals can
then be sorted out and graded for recy-
cling. Our Service Centre will be happy to
answer any questions in this respect.
Defective units returned to us will be dis-
posed of for free.

Technical data

Electric Lawn Trimmer .............ET 3500
Rated input voltage... 230 - 240 V~, 50 Hz
Power input..................................... 350 W
Idling speed ............................ 11500 min
Protection Class .................................
Protection category ........................... IP20
Weight without cable .......................1.4 kg
Dual line.......................6 m, tap automatic
Cutting circle dual line .............. 250 mm
Line thickness dual line ............. 1.2 mm
Sound pressure level
(L ) ....................... 81.7 dB(A), K
pA
Sound power level (L
guaranteed ............................ 96 dB (A)
measured ....... 94.3 dB(A); K
Vibration at the handle
(a ) ........................ 4.9 m/s
h
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the declara-
tion of conformity. The vibration and noise
measuring processes in accordance with
EN 786, appendices D and E, were com-
pleted successfully.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
=3 dB
pA
)
WA
=1.98 dB
WA
, K=1.5 m/s
2
-1
II
2