Trouble Shooting - Grizzly AHS 1852 Lion Translation Of The Original Instructions For Use

Trouble Shooting

Problem
Appliance won't
start
Intermittent op-
eration
Blades become
hot
Bad trim
Possible cause
Battery (9) discharged
Battery (9) not inserted
Safety switch (4) not pressed
properly
On/Off switch (7) defective
Internal loose contact
On/Off switch (7) defective
Blades (2) are blunt
Blades (2) are notched
Too much friction due to lack
of lubrication
Too much friction due to
missing lubrication
Knife bar (2) dirty
Knife bar (2) blunt
Bad cutting technique
Battery not fully charged
Corrective action
Recharge battery (see „Charging")
Insert battery (see „Operation")
Turn on (see "Operation")
Send in to Service Centre for repair
Send in to Service Centre for repair
Have the blades sharpened or replaced
(Service Centre)
Have the blades checked or replaced
(Service Centre)
Oil the blades
Lubricate knife bar
Clean knife bar
Grind or have knife bar replaced
(Service Centre)
See ("Working with the hedge trimmer")
Recharge battery (see "Charging")
GB
33