Step 1
Stand up the base by separating the u-frames. Pull the Front and Rear U-Frames (1,2) as
far apart from each other as possible. Then push down on the middle of the two Folding
Arms (8) until they are fully locked down.
Attach the Left & Right Foot Caps (50, 49) to the Front & Rear U-Frame (1,2) each with
four Screws (48,51) and eight Washers (52).
Hardware:
(48) Bolt M6x20
4PCS
ASSEMBLY
(51) Bolt M6x25
The product weighs more than 44 lbs and should be
assembled and moved by two or more people.
Tool:
(52) Washer Ø13*Ø6.5*1.0
4PCS
10
Phillips Screwdriver 1PC
8PCS