Assembly - Ironman Fitness iControl 5620 Owner's Manual

Step 1:
Lay the frame on its side as shown.
Attach each of the Front Foot Caps (53) to the Legs of the Front Frame (1) with one Washer (27)
and one Bolt (51). Tighten the Bolts (51) with the Multi Hex Tool with Phillips Screwdriver provided.
Attach each of the Rear Foot Caps (49) to the Legs of the Rear Frame (3) with one Washer (27)
and one Bolt (51). Tighten the Bolts (51) with the Multi Hex Tool with Phillips Screwdriver provided.
Note:
The Front Foot Caps (53) are marked with an "F" for Front.

 The Rear Foot Cap (49) are marked with and "R" for Rear.
Hardware:

ASSEMBLY

11
Tool: