Ironman Fitness 5201 Owner's Manual page 14

ASSEMBLY
Step 3
Slide the bottom of the Pivot Arms (5) into the backrest that located at the each side of
the Bed Frame (4), align to the desired hold on the arm with the peg on the bracket.
Insert the peg into the hold to lock the Pivot Arm (5) in place. It is recommended that
you use the bottom hold on the Pivot Arms (5) until you become more familiar with
equipment.
Step 4
Install the Pivot Arm Ring (54) onto the Pivot Arms (5).
Mount the Bed Frame (4) to the Rear U-Frame (2) by inserting the ends of the Pivot
Arms (5) into the channels on the plates.
The slotted portion of the roller on the end of the Pivot Arms (5) should be inserted into
the channels on the plates.
Hardware:
(54) Pivot Arm Ring
2PCS
12