ASSEMBLY
Tool:
Multi Hex Tool with Phillips
Screwdriver
54
54
54
54
Step 1:
1.1 Stand up the base of the machine by separating the Front and Rear U-Frames (1, 2). Pull the
Front and Rear U-Frames (1, 2) apart from each other. Push down on the middle of the Folding
Arms (8) until the frames are fully locked down.
1.2 Attach each of the Right & Left Foot Caps (49, 50) to the Front & Rear U-Frame (1, 2) with
one Screw (48), one Screw (51), and two Washers (54). Tighten the screws using the Multi Hex
Tool with Phillips Screwdriver provided.
Hardware:
(48) Bolt
(51) Bolt
(54) Washer
4 PCS
4 PCS
8 PCS
10