Correlation
Performing a Parameter Correlation Adjustment
1. Start-up Menu
Settings
Tap
to open the settings
menu.
4. Correlation menu
Tap
to open a drop-down
menu. Select which parameter is
to be adjusted. Enter the factor
and the offset accordingly and
tap
to accept the new
correlation settings.
PI MCI-EUR Rev 02
2. Settings menu
Correlation
Tap
to
correlation menu.
5. Test Screen
An active correlation adjustment
is marked by
Correlated
in the test screen when starting a
measurement process.
3.1 Password screen
open
the
Enter the password. The default
setting is 3010.
as seen
39 / 46