The Automatic Start-Up and Warm-Up Processes
1. Warm-up menu
2. Main Menu
The automatic start-up procedure (indicated by the flashing green LED) starts as soon as the Analyser
is connected to the power supply. Izt takes approximately 10 minutes for the Analyser to warm up to
its proper working temperature. In colder environments it may take longer for Analyser to reach
operating temperature.
As soon as the initialization of the optical unit is completed, the
button turns from gray
(locked) to blue and may be used. The Analyser is now operational.
PI MCI-EUR Rev 02
18 / 46