Configuring Interfaces - Saladax MyCare Insite User Manual

Configuring Interfaces

1. Setting menu
Interface
Tap in the Settings
menu. The Interface
appears.
3.1b Standard printer model selection
Tap on the corresponding printer
model to select your default
No printer model
printer. If
selected
is chosen you will be
prompted to choose the desired
printer model directly before the
first printout.
PI MCI-EUR Rev 02
2. Interface menu
Tap an interface to configure. The
menu respective configuration menu
appears.
The following descriptions are in
the order of the interfaces in the
Interface menu.
3.2a Host configuration password
screen
The service password is required to
change interface host options.
Tapping on the input field opens the
Touch Screen keyboard and the
password can be typed. After
pressing OK on the password
screen, the host configuration
menu opens.
If you do not know the Service
Password, please contact your
Official Saladax Distributor.
3.1a Printer configuration menu
Printer model
Tap on
standard printer model
(see 3.1b)
Print operator ID, lot number
serial number
are
information that can be added to
the printout. Tap a checkbox next
to an option to select or de-select it.
Note:
the screenshot above is for
demonstration purposes only. By
default, all boxes are unchecked.
3.2b Host configuration menu
Tap a checkbox next to an option
to select or de-select it. Check
Automatic transmission
automatic transmission of the
standard result information after
the measurement is done via USB
or serial port. Operator ID, lot
number and serial number are
additional information that can be
added to the
transmission
or standard manual
transmission format.
Note:
the screenshot above is for
demonstration purposes only. By
default, all boxes are unchecked.
to select the
and
additional
for
Automatic
21 / 46