Table of Contents
Advertisement
Changing the Language of the MyCare Insite Application
The application language is automatically set to the language of the Touch Screen operating system. It
can be changed by pressing the home button on the Touch Screen (the launch screen appears), then
pressing
to open the settings. Swipe down and select
input
Language & region,
, then
to the launch screen.
Note:
the MyCare Insite application supports several languages. If you choose a language in the system
settings that is not supported by the MyCare Insite application, English will be used.
How to Switch the MyCare Insite Laboatory Photometer ON
The analyser is switched on by plugging the power cable into the socket. This launches the
analyser's automatic start-up and warm-up processes. Please wait for these to be completed
(approximately 10 minutes).
When operating the Analyser:
The door protects the Analyser Chamber from dust, dirt and humidity. Empty the chamber
after every test, and keep it closed when the Analyser is not in use.
The door opens automatically. Do not attempt to open the door manually!
If an error message appears during an analysis, please consult the
"Error information and troubleshooting" section on page 42.
PI MCI-EUR Rev 02
Language,
then
and choose a language. Press the home button to return
Advanced settings,
then
Language and
17 / 46
Advertisement
Table of Contents
