MyCOS Synchronization
Once registered and logged in with a MyCOS account Insite result synchronization is enabled
There are three ways to synchronize data:
•
Synchronize all currently stored measurement results at once
•
Synchronize a single measurement result
•
Synchronize a filtered measurement result list
Synchronize all Test Results
1. Main Menu
Tap
in the main menu to
open the Result List.
Synchronize a single result
1. Main Menu
Tap
in the main menu to
open the Result List.
PI MCI-EUR Rev 02
2. Result List Screen
Tap
in the upper right corner
to synchronize all test results.
When not logged in with a
MyCOS account, the
registration or login screen will
appear.
2. Result List Screen
Tap a result to open the result detail
screen.
3. MyCOS Registration & Login Screen
Use
to register a new
MyCOS account (see page 32)
or
to log in with an already
existing MyCOS registration
(see page 33).
After registration or login, the
results will be synchronized.
3. Result Detail Screen
Tap
to synchronize the result
currently viewed.
30 / 46