Setting Units; Configuring Inputs (Sex, Sample Type, Operator) - Saladax MyCare Insite User Manual

Setting Units

1. Settings menu
Units
Tap to open the Unit
selection menu.

Configuring Inputs (Sex, Sample Type, Operator)

1. Settings menu
Input
Tap to open the Input menu.
3.2 Sample Type menu
Tap and a drop-down menu
opens, select which type of
sample should be selected by
Last used
default.
sample type last used will be
selected. Confirm
Press to cancel.
PI MCI-EUR Rev 02
2. Unit selection menu
If alternate units are available,
tap
drop-down menu. Confirm the
change(s) with
2. Input menu
Tap
respective menu will open. The
following
provided in the order of the
parameters in the Input menu.
3.3 Operator menu
Enable the operator mode by
tapping the button. To create a
new operator, type the name in the
means the
box blank and then tap
To delete an operator, tap
and select a name in the drop
with .
down menu, then tap
and select a unit in the
.
a parameter and
descriptions
.
3.1 Default sex menu
the Tapping opens a drop-down
menu. Select which gender is to be
are used as the standard default.
Last used
means that the gender
last used will always be selected.
Control may be selected when a
control is tested.
.
20 / 46