Table of Contents
Advertisement
4. Electromagnetic interference with any radio wave receiver such as radio or television:
If the equipment and / or system interferes with any radio wave receiver, locate the
equipment and/or system as far as possible from the radio wave receiver.
If the above suggested remedial actions do not solve the problem, consult your Distributor for
additional suggestions.
The Touch Screen
The MyCare Insite Analyser is operated with a Touch Screen.
Insure the Analyser is plugged in. Connect the Touch Screen to the USB port (see page 9) of the
Analyser and then turn on the Touch Screen.
An independent Touch Screen manual is included with the Touch Screen. It describes in detail the use
of the Touch Screen, how to manage settings and establish a Bluetooth or USB connection between
the Analyser and the Touch Screen.
Starting & Operating the Touch Screen
1. Connection Screen
The connection screen appears when the Touch
Screen is connected to the MyCare Insite
Analyser. The serial number, firmware version
and wavelengths are displayed.
Next
Tap
to continue.
The MyCare Insite Launch Screen
Launch Screen
PI MCI-EUR Rev 02
2. Main Menu
The MyCare Insite application starts and the main
menu appears.
Note:
while the MyCare Insite Analyser is warming
up (indicated by the flashing green LED on the
front, see page 10) the "Measurement" button is
grey and inactive.
The Launch Screen is shown when the Touch
Screen is not connected to the Analyser or by
pressing the Touch Screen home button.
Browser
Tap
to open the Android web browser.
Touch the MyCare Insite Logo to start the MyCare
Insite app.
Settings
Touch
to open the Android setting menu.
16 / 46
Advertisement
Table of Contents
