MULTICAL® 603
3.3 Data
The country code is selected as the last two characters of the meter's static part of the type number.
In addition to defining the language on the meter label as well as approval and verification marks, the country code is
also used to control the configuration of a number of meter data.
During production of MULTICAL® 603 it is programmed with a number of measuring values in the fields listed overleaf.
Unless the order includes specific requirements as to configuration, MULTICAL® 603 be supplied with the default
values from the table.
1
Serial no. (S/N)
(See paragraph 3.4)
Customer no.
Display No. 1 = 8 digits MSD
Display No. 2 = 8 digits LSD
Yearly target date 1 (MM.DD)
Monthly target date 1 (DD)
Yearly target date 2 (MM.DD)
Monthly target date 2 (DD)
Averaging period for min./max of
power (P) and flow (Q)
(See paragraph 7.5)
Averaging period of CP
(See paragraph 7.2)
Heat/cooling shift
hc
Only active if meter type 6 is
selected
(See paragraph 7.4)
Date/time
GMT offset
Primary address of M‐Bus,
Modbus and BACnet
M‐Bus ID no.
(used for secondary address)
wM‐Bus ID no.
54
Automatic
80,000,000
‐
‐
‐
‐
‐
‐
‐
‐
20YY.MM.DD/
hh.mm.ss
‐
‐
4
‐
‐
Written on the
meter's front
Type 603 ‐
□ ‐ □ ‐ XX ‐ □ ‐ □□ ‐ □ ‐ □□ ‐ □□
To be stated in order
‐
Up to 16 digits
MM=1‐12 and DD=1‐31
DD = 1‐31
MM=1‐12 and DD=1‐31 +
00.00 (disabled)
DD = 1‐31 +
00 (disabled)
1...1440 min.
5...30 days
2...180.00 C + 250.00 C
GMT 12.0 hours
(Can be defined at half hour
intervals)
‐
Address 0‐250
‐
‐
Kamstrup A/S ∙ Technical description ∙ 5512‐2029_A1_GB_06.2017
Static data
603‐xxxx
‐
Standard
‐
Customer no. equal to
S/N
Depends on country
code
2
2
60 min.
7 days
Heat/cooling, meter type
6:
3
25.00 C
‐
Depends on country
code
Last 2‐3 digits of
customer number
Customer no.
Serial number
Dynamic data
xxxxxxxx
Can be displayed