Data; Electrical Data; Mechanical Data - Kamstrup ULTRAFLOW 54 Series Technical Description

ULTRAFLOW® 54 (H)/(J)

2 Data

®
ULTRAFLOW 54 (H)/(J)

2.1 Electrical data

Supply voltage
Battery
(Pulse Transmitter/
Pulse Divider)
Replacement interval
Mains supply
(Pulse Transmitter/
Pulse Divider)
Power consumption,
mains supply
Backup mains supply
Cable length
Flow sensor
Pulse Transmitter/
Pulse Divider
Cable Extender Box
EMC data

2.2 Mechanical data

Metrological class
Environmental class
Mechanical environment
Ambient temperature
Protection class
Flow sensor
Pulse Transmitter/
Pulse Divider
Cable Extender Box
Humidity
®
ULTRAFLOW 54:
Medium in flow sensor
Medium temperature
Storage and transport
temperature, empty flow sensor
Pressure stage
8
3.6 VDC ± 0.1 VDC
3.65 VDC, D-cell lithium
 30 °C
6 years @ t
BAT
230 VAC +15/-30 %, 50 Hz
24 VAC ±50 %, 50 Hz
 1 W
Integral SuperCap eliminates interruptions due to short-term power failures
Max. 10 m
Depends on calculator. Max. 100 m when connected to MULTICAL
Depends on calculator. Max. 30 m when connected to MULTICAL
Fulfils EN 1434:2015 class C, MID E1 and E2
2 or 3
Fulfils EN 1434 class C
MID M1 and M2 (flow sensor type 65-5-XXHX-XXX only)
5...55 °C, non-condensing, closed location (installation indoors)
IP65
IP67
IP65
Non-condensing,  93 % RH
Water – recommended water quality as in CEN TR 16911 and AGFW FW510
15...130 °C or 15...90 °C
-25...60 °C
PN16, PS16 and PN25, PS25
With output module (Y=3)
When properly installed. See paragraph 7
Installation
At medium temperatures above 90 °C calculator
and Pulse Transmitter/Pulse Divider must not be
mounted on the flow sensor. Instead wall mounting
is recommended.
Kamstrup A/S ∙ Technical Description ∙ 5512‐1554_J1_GB_04.2018
®
(Y = 2).
®
603.