Advertisement
For handling the machine it is necessary to use special lifting equipment whose maximum lifting
capacity must be no lower than the total weight of the press which can be found on page 2 of this
manual.
Loading and unloading the machine
Use lifting straps are to be used to position as shown below in Fig 4.
WARNING!!!
Be sure the maximum capacity of each strap is greater than the total weight of the press.
Do not make sudden movements when transporting the machine.
The manufacturer is not responsible for damage to the machine while loading or unloading the
press.
Pick up
here
Positioning the press
Simple precautions are necessary for correctly positioning the press always consider the safety
aspect not only in relation to the work carried out with the press, but also to the dangers
originated by the other machines in the workplace.
Do not position on unstable or unleveled floor.
Below in fig. 4 is the allowable distance from the wall, other machines or other objects.
Fig. 4
Commissioning and Starting
Electrical connection
Force 40 70 100 150 Ton
Fig. 4
6
Pick up
here
Advertisement
