Advertisement
Putting out of service
In the case of not operating for a long period it is necessary to disconnect the press from the
sources of electrical power supply.
Empty the unit of oil and protect it suitably so there is no dust, moisture or other foreign bodies
that can damage the parts of the unit.
Demolition and division of materials
If you are not going to use the machine any more, it is recommended to make it inoperative by
removing the oil contained in the tank and eliminating the oil remaining in the cylinder,
hydraulic lines, pump body and valves.
When going for demolition the press must be treated as special waste, it must therefore be split
up into its homogeneous parts, these parts must be separately disposed of in conformity with
local and state laws along with all OSHA regulations.
15
Force 40 70 100 150 Ton
Advertisement
