Advertisement
6. Unclip and remove the trim panel above
the glove box. Remove (3) T-20 Torx
screws exposed, securing the radio &
instrument trim panel. (Figure F,G)
7. Unclip the top of the steering column
shroud. The shroud is connected to the
radio & instrument-cluster trim panel by
a piece of material and will be removed
fully in the following step. (Figure H)
DASH DISASSEMBLY
(Figure F)
(Figure G)
(Figure H)
(CONT.)
8. Unclip and remove the radio &
instrument-cluster trim panel, including
the shroud loosened in the prior step.
(Figure I)
9. Using radio removal keys (sold
separately), release the radio. Slide the
radio out, then unplug and remove.
Remove (2) metal clips attached to
the sides of the radio for re-use in Kit
Preparation. (Figure J)
Note: This is just the display for the
radio. The radio brain is located above
the glove-box.
Continue to Kit Preparation
(Figure I)
(Figure J)
Use this end of the
radio removal key
REV. 10/10/2019 INST99-9014HG
3
Advertisement
