Right Handlebar Switches - Triumph Street Triple S Owner's Handbook Manual

Press and release the HOME button to
select between the main menu and
instrument display.

Right Handlebar Switches

All Models except Street Triple RS
2
3
4
1. Engine start/stop switch
2. STOP position
3. RUN position
4. Start position
5. Hazard warning light switch
STOP Position
The STOP position is for emergency use.
If an emergency arises which requires
the engine to be stopped, move the
engine start/stop switch to the STOP
position.
Do not leave the ignition switch in the
ON position unless the engine is
running as this may cause damage to
electrical components
discharge the battery.
1
5
Caution
and
General Information
Note
Although the engine stop switch stops
the engine, it does not turn off all the
electrical
difficulty in restarting the engine due to
a discharged battery. Ordinarily, only
the ignition switch should be used to
stop the engine.
RUN Position
In addition to the ignition switch being
turned to the ON position, the engine
start/stop switch must be in the RUN
position for the motorcycle to operate.
START Position
The START position operates the electric
starter. For the starter to operate, the
clutch lever must be pulled to the
handlebar.
Note
Even if the clutch lever is pulled to the
handlebar, the starter will not operate if
the side stand is down and a gear is
engaged.
Hazard Warning Lights
To turn the hazard warning lights on or
off, press and release the hazard
warning light switch.
The ignition must be switched ON for
the hazard warning lights to function.
The hazard warning lights will remain on
if the ignition is switched to the PARK
will
position, until the hazard warning light
switch is pressed again.
circuits and may cause
33