Headlight Adjustment; Headlight Replacement - Triumph Street Triple S Owner's Handbook Manual

Headlight Adjustment

The vertical beams of the left and right
hand headlights can only be adjusted
together. Independent adjustment is
not possible.
1. Headlight bracket bolts
2. Front subframe alignment marks
3. Headlight bracket mark
To vertically adjust the headlights:
• Switch the ignition on. The engine
does not need to be running.
• Switch the headlight dipped beam
on.
• Loosen the two headlight bracket
bolts securing the headlight bracket
to the front subframe sufficiently to
allow restricted movement of the
headlights.
• Using the headlight bracket mark
and the alignment markings on the
front subframe, adjust the position
of the headlights
required beam
alignment mark on the subframe
represents 1°.
• Moving the
forwards moves
upwards. Moving
bracket rearwards
headlights downwards.
1
to give the
setting. Each
headlight bracket
the headlight
the headlight
moves the
• Tighten the headlight bracket bolts
to 62 lbf in (7 Nm).
• Recheck
settings.
• Switch the headlights off when the
beam settings are satisfactorily set.

Headlight Replacement

The headlight
maintenance
headlight unit must be replaced in the
event of the failure of the headlight.
2
3
Maintenance
the headlight
unit is a
free LED unit.
beam
sealed,
The
179