Cleaning and Storage
Washing
To
wash
the
following:
•
Make sure that the motorcycle
engine is cold.
•
Prepare a mixture of clean, cold
water and mild automotive cleaner.
Do not use a highly alkaline soap as
commonly found at commercial car
washes because it leaves a residue.
•
Wash the motorcycle with a sponge
or soft cloth. Do not use abrasive
scouring pads or steel wool. They
will damage the finish.
•
Rinse the motorcycle thoroughly
with clean, cold water.
184
motorcycle,
do
After Washing
the
Never wax or lubricate the brake discs.
Always clean the brake disc with a
proprietary brand of oil-free brake disc
cleaner.
Waxed or lubricated brake discs may
cause loss of braking power and an
accident.
After washing the motorcycle, do the
following:
1.
Remove the plastic bags and tape,
and clear the air intakes.
2. Lubricate the pivots, bolts and nuts.
3.
Test the brakes before motorcycle
operation.
4. Use a dry cloth or chamois leather
to absorb water residue. Do not
allow
motorcycle as this will lead to
corrosion.
5. Start the engine and run it for
5 minutes. Make sure that there is
adequate ventilation for the exhaust
fumes.
Warning
water
to
stand
on
the