Suspension; Front Suspension; Front Suspension Settings - Triumph Street Triple S Owner's Handbook Manual

Warning
Never attempt to dismantle any part
of the suspension units
All

suspension

pressurized oil.
Skin and eye damage can result from
contact with the pressurized oil.
Street Triple S (40.2 cu in (660 cc))
shown
To inspect the forks:
• Position the motorcycle on level
ground.
• While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
• If roughness or excessive stiffness
is detected, consult your authorized
Triumph dealer.
• Examine each fork for any sign of
damage, scratching of the slider
surface, or for oil leaks.
• If any damage or leakage is found,
consult an
dealer.
units contain
authorized Triumph
Suspension

Front Suspension

Warning
Make sure that the correct balance
between front and rear suspension is
maintained.
Suspension
significantly
characteristics
control and an accident.
Refer to the
information or consult your authorized
Triumph dealer.
Warning
Make sure that the adjusters are set
to the same setting on both front
suspension units.
Settings that vary from left to right
may affect handling and stability
resulting in loss of motorcycle control
and an accident.

Front Suspension Settings

The motorcycle is delivered from the
factory with all the suspension settings
set at the Road (Solo Riding) setting, as
shown in the
settings tables. The Road suspension
settings provide a comfortable ride and
good handling
general, solo riding.
Maintenance
imbalance could
change handling
leading to loss
table for further
relevant suspension
characteristics
of
for
159