Clutch Adjustment
To adjust the clutch:
•
Turn the adjuster sleeve until the
correct amount of clutch lever free
play is achieved.
2
3
2 - 3 mm
1.
Clutch lever
2.
Adjuster sleeve (lock nut fully loosened)
3.
Correct clearance 0.08 - 0.12 in (2 - 3 mm)
•
Check that there is 0.08 - 0.12 in (2 -
3 mm) clutch lever free play at the
lever.
•
If there is an incorrect amount of
free play, adjustments must be
made.
•
If correct adjustment cannot be
made using the lever adjuster, use
the cable adjuster at the lower end
of the cable.
cjxg
1
1.
Adjuster locknuts
2.
Clutch outer cable
•
Loosen the adjuster lock nut.
•
Turn the outer cable adjuster to give
0.08 - 0.12 in (2 - 3 mm) of free play
at the clutch lever.
•
Tighten the locknut to 30.1 lbf in
(3.5 Nm).
Maintenance
1
143
2