Before You Begin; Installing The Network Driver - 3Com 3C589D User Manual

Before You Begin

Before you begin installing the network driver, obtain the
EtherDisk diskette and Windows for Workgroups v3.11
installation files (on hard disk, floppy diskettes, or CD).
Ask your MIS department for the following information:
The latest versions of the Card and Socket Services must be
installed on your machine. Check with your PC manufacturer
if you are not sure.
If you installed any other network adapter or network
driver in the PC, consult your MIS department for further
instructions.

Installing the Network Driver

1 Using the Windows menu, select Network.
2 Select Network Setup.
3 In the Network Setup dialog box, select the
Networks... button.
4 Select Install Microsoft Windows Network and then
click OK.
5 Select the Drivers... button.
6 In the Network Adapters dialog box, click Add Adapter.
A dialog box appears, listing the supported network
adapters on the diskette.
7 From the list of network adapters, select Unlisted Or
Updated Network Adapter, and click OK.
8 Insert the EtherDisk diskette in drive A and click OK.
A dialog box appears, prompting you to specify the drive or
directory where the EL3C589D.DOS driver can be found.
9 Click OK to accept the default directory. Otherwise, if
you need to specify the directory, type:
a:\ndis2
10 Select 3Com EtherLink III LAN PC Card and click OK.
Microsoft Windows for Workgroups (WFW)
Transport protocol used in the Microsoft Windows
Network (typically NetBEUI)
Name of the NT Server domain or Windows 95/WFW
3.11 Workgroup to which you belong
3-11