Configuration Settings Descriptions; Cis Memory Address; I/O Base Address - 3Com 3C589D User Manual

If you are using Card Services, the I/O Base Address and the
Interrupt Request Level settings are assigned by Card
Services. If you change these settings here, they will be
saved to the EEPROM, but the PC will still use the values
Card Services allocated at start-up.
The configuration window appears.
6 Use the arrow keys to scroll through the list of
settings for that option. Select a setting and press
[Enter].
7 Continue this procedure with any of the other
options.
When all changes are complete, press [Esc] to exit the
program.
Configuration Settings Descriptions
This section describes each configuration setting for the
3C589D PC Card. Table 5-1 displays the possible values for
each setting.

CIS Memory Address

The CIS Memory requires a 4 K segment of memory for
drivers and an 8 K block when you are running diagnostics.

I/O Base Address

The I/O address space is used by the PC Card for
communication between the PC Card and the PC. The PC
Card uses 16 bytes of I/O space, starting at the I/O Base
Address.
Make sure that no other device is using the same value.
The I/O Base Address range is from 200h to 3A0h and is
assigned by Card Services. If you are not using Card
Services, the default is 300h.
Configuration Settings Descriptions 5-3