3Com 3C589D User Manual page 37

5
This chapter describes how to display and change the PC
Card configuration settings by using the supplied DOS
configuration program.
The DOS configuration runs under DOS and at a DOS
prompt in a PC with Windows 95 installed.
Table 5-1 lists each software option, the default setting,
and the other available settings. For a detailed description
of these settings, see Configuration Settings Descriptions at
the end of this chapter.
.
Table 5-1 Option Settings
Option
CIS Memory Address
I/O Base Address
Interrupt Request Level Assigned by Card
Transceiver Type
Network Driver
Optimization
Power Management
C
HANGING
S
ETTINGS
Default Setting
Assigned by Card
Services
Assigned by Card
Services
Services
Auto-Sense
Windows or
OS/2 client
Enabled
C
ONFIGURATION
Available Settings
4 K contiguous block of memory
200h, 210h, 220h, 230h, 240h,
250h, 260h, 270h, 280h, 290h,
2A0h, 2B0h, 2C0h, 2D0h, 2E0h,
2F0h, 300h, 310h, 320h, 330h,
340h, 350h, 360h, 370h, 380h,
390h, 3A0h
3, 5, 7, 9, 10, 11, 12, 15
Auto-Sense, Twisted-Pair, or Coax
DOS client, Windows client, or OS/2
client or server
Enabled, disabled