Microsoft Windows For Workgroups (Wfw) - 3Com 3C589D User Manual

3-10 C
HAPTER
9 Click OK to accept the default settings for the 3C589D
PC Card or enter new settings.
10 If networking is already installed, enter the IP
Address if prompted, and reboot the PC to activate
the network.
11 If networking is not installed, select the transport
protocol (NWLink IPX/SPX compatible transport,
TCP/IP protocol, NetBEUI protocol) in the Windows NT
Setup Window.
a Click OK.
b If prompted, enter the directory name where the NT
c Click No.
d Click OK.
e Click Close.
f If prompted, enter the domain or workgroup name for
g Remove the EtherDisk diskette and restart your PC.
The driver installation is complete.

Microsoft Windows for Workgroups (WFW)

The EtherDisk diskette contains a subdirectory structure
and files that make it an OEM import disk for Windows for
Workgroups (WFW).
WFW v3.11 does not include internal support for the Plug
and Play standard. Because NDIS 3 (32-bit) drivers operate
only in Plug and Play environments, you cannot operate the
3C589D PC Card with the included 32-bit driver.
To ensure support for WFW v3.11, 3Com includes a 16-bit
NDIS 2.0 driver. This driver offers full support for WFW, but
may affect PC performance. To resolve this deficiency with
WFW 3.11, you may want to upgrade your operating
system.
3: I N
NSTALLING THE
installation files are located.
Windows Networking and click OK.
D
ETWORK RIVER