Before You Install Software - 3Com Server User Manual

10 LNK:
100 LNK:
Figure 2-3 NIC LEDs at Power Up

Before You Install Software

Before you install a software driver, you may want to run
the Configuration and Diagnostic Program, as described in
Chapter
See the instructions in
the 3Com diskette. For information on LED states after the
software is installed, see
Be sure that the NIC hardware and software are installed
correctly before replacing the computer cover.
T X
T X
ACT
A C T
L
10 LNK
1 0
N
K 1 0 0
100 LNK
ACT: Off until the network driver is installed;
after driver installation, yellow indicates port traffic
Green indicates 10 Mbps link integrity
Green indicates 100 Mbps link integrity
4.
Before You Install Software
Chapter 3 to install the driver from
Table 4-1 in Chapter
2-5
4.