NEC UNIVERGE SV8500 Setup Manual page 68

No. Item
(1) Login Grade List
(2) Remove
(3) Executable Command
(4) [Setup] button
(5) [Restore] button
(6) [Close] button
If the login grade already registered is selected, "exist" is displayed in Data column. If not registered, the
Note 1:
login grade is displayed in grayout status.
If the login grade already registered is selected, the status on the check box of each executable command
Note 2:
is displayed as registered. If not registered, all the checkbox status are displayed as OFF.
Each commands are grouped for each features. When the check box for any feature is checked, all the com-
Note 3:
mand related to the feature is allowed to execute. If the check box on the "All Command" is checked, all
the commands are allowed to execute.
STEP 2: Edit the login grade and click the Setup button. "exist" is displayed on the Data column of the login
grade being selected from the login grade list.
STEP 3: Click [Close] button in the [Login Grade Setting] screen.
The logig grade has now been set.
The available login grade (1-16) are displayed for each Data Memory. Note 1
When the login grade is selected, the status on the check boxes for executable com-
mands are changed, and they can be edited. Note 2
Click to delete the login grade selected from the Login Grade List.
Set ON to the check box of the command that you want to allow to execute. Note 3
Click to setup the edited login grade.
Click to restore the status on the check box for executable command to the former
status.
Click to close the [Login Grade Setting] screen.
– 52 –
CHAPTER 5 Various Settings of PCPro
Description