Fitting And Removing The Battery Pack; Battery Charging - Yardworks 060-3891-6 Instruction Manual

model no. 060-3891-6 | contact us: 1.866.523.5218

FITTING AND REMOVING THE BATTERY PACK

To remove the battery pack from the tool, firmly
press the battery release button at the back
of the battery pack and slide the battery pack
backward. Then pull or lift the battery out of the
tool handle.
To install the battery pack into the tool, align the
rails of the battery pack with the rails in the tool
and push the battery into the housing. To connect
the battery, slide the battery pack fully
forward.
CAUTION: Always ensure that the tool is switched off and
!
the battery is removed before making any adjustments or
maintenance procedures.

BATTERY CHARGING

IMPORTANT. Before plugging in the power supply
from the plug pack charger always ensure that the
plug is switched off at the domestic power supply.
IMPORTANT. The battery will be fully charged after
approx imately three to five hours. Remove it from the
charger after this time.
Do not leave a battery charging for longer than 24
hours.
1. Connect the plug pack charger (5) to a domestic
power
outlet (120 V).
2. Insert the plug pack charger (5) lead into the back
of the battery.
7