Yardworks 060-3891-6 Instruction Manual page 19

model no. 060-3891-6 | contact us: 1.866.523.5218
• Your automatic tool with lithium-ion
batteries may only be charged with the
specific designed automatic lithium-
ion battery charger purchased with
the tool. IT IS DANGEROUS TO USE
ANY OTHER BATTERY CHARGER TO
CHARGE YOUR TOOL. Do not attempt
to charge the battery pack with any
other charger than the one supplied.
• If there is a problem with the battery
or the tool, take it to your nearest
authorized service centre or phone and
speak with an experienced customer
service representative for assistance in
rectifying your problem.
• Before using the charger, read all the
instructions, labels and cautionary
markings on the charger and battery
pack as well as the instructions on
using the battery pack.
• Do not use the charger if it has been
subjected to a heavy knock, dropped or
otherwise damaged in anyway. Take the
charger to an authorised service centre
to be checked or repaired.
• Do not disassemble the charger.
Phone and speak with an experienced
customer service representative or
contact a power tool repair centre for
assistance. Opening or removing covers
may expose you to dangerous voltages
or other risks. Incorrect reassembly can
cause electric shock when you use the
tool or charger again. Take the charger
WARNING: Do not allow any liquid to come into contact with
!
the charger. There is a danger of electric shock. Do not
position the tool or battery charger near water; for example,
near a sink, wash bowl or toilet. Do not spill liquid of any
kind on the tool or charger. Doing so may short out parts,
causing damage to the product and creating the risk of
fire or electric shock.
to a power tool repair centre when
service or repair is required. Incorrect
re-assembly may result in the risk of
fire, electric shock or electrocution. To
reduce the risk of electric shock, do not
disassemble any part of the product.
• DANGER. If the battery pack is cracked
or damaged in any other way, do not
insert it into the charger
• Do not plug anything other than your
automatic tool into the charger, as other
objects may touch dangerous voltage
points or short out parts, which could
result in fire or electric shock.
• Do not place the tool or charger on an
uneven surface, as a fall may cause
serious damage.
• Never place the tool or charger near or
over a heat source such as a radiator or
heater.
• Do not operate the charger in a cabinet
or other enclosure unless proper
ventilation is provided.
• Use the battery charger indoors only.
19