Edit User; Delete Users; Enroll Fingers - CAMDEN CV-940-20 Series Installation Instructions Manual

9.6 Edit User

• Find the user at user table to edit
• Click on the user field for edit (Name, ID or PIN)
• Type new value
• Press Enter on the keyboard
Important:
When ID is changed, warning message is displayed
reminding that if ID exist in some reader, should be
deleted from reader prior to change.

9.7 Delete Users

• Check the users to be deleted (Fig. 9.7 a)
• Right-click on the users table
• Click on Delete checked users menu (Fig. 9.7 b)

9.8 Enroll Fingers

• Select the User in the User Column, not the check
box (the check box is for sending the fingerprints)
and the User name cell will turn blue
• Select the Biometric reader or Desktop reader
CV-350ER from where the enrollment will be done
(Fig. 9.8 a)
• Right click on the fingertip and select Enroll
(Fig. 9.8 b)
• Swipe the finger on the Reader and the finger tip will
become blue, with percentage of successful enrollment
given right beside the fingertip (Fig. 9.8 c)
Note: If more fingerprints are added for one user, all
fingerprints will send the same Wiegand Code to
the controller.
Confirm warning message
Page 17 of 21
CV-940-20 Series
Fig. 9.7 a
Fig. 9.7 b
Fig. 9.8 a
Fig. 9.8 b
Fig. 9.8 c