Edit Reader; Delete Reader - CAMDEN CV-940 Series Installation Instructions Manual

9.1 Add Reader
• Click on Save and the reader icon appears
under the selected portal
8.25
• Right-click on reader and select Check Version
• If reader is online, new line is added on top of the
event table

9.2 Edit Reader

• Right-click on the reader and select Properties
(Fig. 9.2 a)
• Edit reader properties and click Save & Exit button
• Right click on the reader and select Send
configuration (Fig. 9.2 b)
• Check at event table if configuration was
successful (Fig. 9.2 c)

9.3 Delete Reader

• Right-click on the reader and select
Delete reader
8.26
8.27
• If reader is not online, following line is added on top
of the event table
• If reader is online, right click on reader and select
Send configuration
• Check at event table if configuration was successful
Fig. 9.2 a
Page 13 of 19
CV-940 Series
8.28
8.29
8.30
Fig. 9.2 b
Fig. 9.2 c
Fig. 9.3