Table of Contents
Advertisement
3. Mounting
Ø6.0
Cable
m
3 0 m
If the biometric reader is installed and used outdoor, the
reader MUST be fitted with the ATPD-MINI polycarbonate
cover available in our accessories in order to protect the
sensor from direct rainfall. The operating temperature
of the product is between -15ºC - +50ºC. If the reader
is installed in an environment where the temperature
can drop below -10ºC or/and if the sensor could only be
exposed to direct sunlight, it is strongly recommended to
install the reader inside a third party sealed wall mount
box (fitted with additional heater if very low temperature)
to keep a constant sensor level performance. Camden™
cannot guarantee the functionality of the product if
measures and advice before are not followed.
It is also strongly recommended to use double technology
biometric readers when use outdoor to offer first higher
security but alsothe possibility to use different readers
depending on users.
Page 4 of 21
CV-940-20 Series
ATPD-MINI
Advertisement
Table of Contents
