Page 1
– back emf. If you are using a « Shear Lock » electromagnetic lock, it is recommended to use a separate power supply than the one connected to the CM-500SK! 5502 Timberlea Blvd, Mississauga, ON L4W 2T7 Tel: (905) 366-3377...
Page 2
5-digit programmable master code Inputs 2 request to exit inputs Keypad 12-digit keypad with built-in buzzer Distance between Maximum 50 meter CM-500SK and auxiliary keypad (recommended cable 4 x 0.6 mm Default values Master code: 12345 Time outputs: 1 second...
Page 3
Setting a new master code 1. Enter the master code twice (for the first use the master code default value is 12345). 2 beeps sound and the LED lights on in orange to confirm entry in programming. 2. Enter 3 then the 5-digit of the new master code. The LED lights off during 1second and an audible beep indicate that the code has been accepted.
Page 4
Setting user codes The user codes are programmed from the main unit (CM-500SK). The key # cannot be used in a code. To validate a user code faster, it is recommended to enter the user code starting by the first user number of each group.
Page 5
Wiring of the auxiliary keypad Wiring to CM-500SK Data Yellow M Common Grey Power supply Brown Power supply White E M B Grey Yellow White Input Voltage Brown 12V AC/DC Operating the auxiliary reader: Enter the 5-digit user code and press the # key. (Must enter 5-digits for the user code) The # key is used as the ENTER key.
Page 6
01 = 1 sec, 99 = 99 sec Door release time relay 2 RL2 Master Code 5-digit Programmed by: Date Building: No.: Street: City: Other information: Filename : CM-500SK Instructions.doc Part Number : 40-82B038 Version : 27/06/11 09:42 Page 6 of 7...
Page 7
CM-500SK Template 23 mm Wiring access area 30 mm x 40 mm 15 mm 38 mm 61 mm 75,5 mm Page 7 of 7...