Add Reader - CAMDEN CV-940-20 Series Installation Instructions Manual

9.1 Add Reader

• Right-click on the portal connected to the
reader and select Add reader
• Fill the Reader form
• Click on Save and the reader icon appears
under the selected portal
• Right-click on reader and select Version info
• If reader is online, new line is added on top of the
event table
• If reader is not online, following line is added on top
of the event table
• If reader is online, right click on reader and select
Upload configuration
• Check at event table if configuration was successful
Page 15 of 21
CV-940-20 Series