CAMDEN Invision CV-920 Series Installation Instructions

Download this manual

Feature

• Multi protocol peripheral keypad

• Operates on 12V DC

• Indoor/outdoor use

• Compatible with WIEGAND 26, 30, 34, 40bit,

Clock & Data

• Red, Green and Orange LEDs

• Audible and visual feedback

• Resin Potted electronics

• Current Consumption: 45 mA

• Backlit keys

• Selectable PIN Code length

• Dustproof and waterproof (IP65)

• Operating Temperature : -4ºF to +122ºF

Mounting

(-20ºC to +50ºC)

Cable

(51mm)

3 5/8"

(92mm)

(25mm)

Page 1 of 5

CV-920 Series

Installation Instructions

+ 1

x x

Page 1 CV-920 Series Installation Instructions Feature • Multi protocol peripheral keypad • Operates on 12V DC • Indoor/outdoor use • Compatible with WIEGAND 26, 30, 34, 40bit, Clock & Data 2” (51mm) • Red, Green and Orange LEDs • Audible and visual feedback •...
Page 2 CV-920 Series Wiring COLOUR CONNECTION 12V DC 12V DC 12V DC Ground Black 12V DC Power Tamper Tamper Tamper Switch Supply Pink Black Tamper Tamper Tamper Switch Violet Pink Tamper Orange LED Red LED Red - Red LED - Violet LED Green Green LED Green -...
Page 3 CV-920 Series Clock & Data Connection Black Black 12 VDC +12V White D0/Clock White Yellow D1/Data Yellow Controller Max. 50m Tamper Pink Pink Violet Violet Green LED Free tension Red LED Free tension Orange LED Key press and Menu Page 3 of 5...
Page 4: Programming Flowchart
CV-920 Series Programming Flowchart B + 000000 Enter “Master Code” Error Beep Validation OK? (3 short beeps) 1 small beep + 1 long beep + Orange LED is ‘ON’ Change Enter Site Select Output Protocol Presets Code Master Code Enter New Master Code 5 digits Wiegand...
Page 5 CV-920 Series Connecting CV-920 to CV-350 Controller When CV-920 is connected to CV-350 Controller, settings must be done in the CAMS Software and in the CV-920 Keypad. Example: Create a User to access with Card or PIN Code. fig.2 The Card Number is 8744987 and the PIN Code 12345. Settings in the CAMS Software 1.