AJAX MotionProtect Curtain User Manual page 5

If the MotionProtect Curtain has already been paired with another hub, turn off
the detector, and then follow the standard pairing procedure.
After pairing, the detector will appear on the app's hub device list. The frequency
of the device status updates depends on the polling interval indicated in the
hub's settings (36 seconds by default).
If the detector identi es movement before the system is armed, it will activate
not immediately but the next it is polled by the hub.
Statuses
1. Devices
2. MotionProtect Curtain
Parameter
Temperature
Signal Strength
Battery Charge
Lid
Delay When Entering, sec
Delay When Leaving, sec
Connection
Sensitivity
Value
The detector's CPU temperature (changes
gradually)
The strength of the signal between a hub and
the detector
The detector's battery charge, displayed in the
increments of 25%
The status of the detector's tamper device that
responds to the detachment and removal
attempts.
The delay for security system activation when
entering premises
The delay for security system activation when
leaving premises
Status of the connection between the hub and
the sensor
Detector sensitivity:
Low
High
Normal