Installation - Oasis PCPEBQ Installation Instructions Manual

Free standing ontactless bottle filler with quasar uvc-led, unfiltered/filtered, 230v
Hide thumbs Also See for PCPEBQ:
Table of Contents

Advertisement

6. INSTALLATION:

6. INSTALLATION:
6. INSTALLATION:
6. INSTALLATION:
STEPS 3 through 5 (for optional filters)
Note: If this unit is equipped with a two stage filtration system, then the remedi
filter was shipped installed. The VersaFilter III was placed in the alcove on the
front of the cooler for shipping.
3.
Unpack the VersaFilter III and remove the sanitary cap.
4.
Looking at the filter top, orient the filter so that the rectangular lug, on top
of the filter faces forward.
5.
Push the filter up into the filter housing and rotate the filter one-quarter
turn to the right until it stops turning. Refer to Diagram 3
Lug
VERSAFILTER III
DIAGRAM 3
Remedi Filter –
shown in Green
Filter housing was
installed at the
factory.
IMPORTANT: When
replacing filter
cartridge, turn OFF
water supply.
Depressurize water
lines prior to removal
of filter housing from
the quarter turn
filter head assembly
.
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

PcpebqyPcp10ebqPcp10ebqyPf2cpebqPf2cp10ebq

Table of Contents