Doosan Power Train D50S-5 Specifications Systems Operation Testing & Adjusting Disassembly & Assembly page 48

30. Remove bearing cone(71) and gear(72) from the
intermediate gear using puller. Remove the
bearing cone(73) on the opposite side in the
same manner.
Be sure to mark the positions of each gear and
bearing.
31. Remove the oil collector (75) and bolt (74) from
output shaft assemble (70).
32. Remove spacer (77) and bearing cone (76) from
the output shaft assembly.
Power Train
CAUTION
When removing the spacer, take care not to tear
the O-ring in the spacer.
33. Disassemble the bearing cup (62) from the
transmission case.
Mark the bearing for identification.
34. Remove lip-shaped oil seal (63) from the gear.
47
CAUTION
CAUTION
Disassembly and Assembly