Transfer Screen Data To Gp-4301Tm - Pro-face GP4000M Series Installation/Replacement Manual

3.5 Transfer screen data to GP-4301TM

Thransfer the converted project file to GP-4301TM. Although you can transfer data to
GP-4301TM via a USB transfer cable (model: ZC9USCBMB1), a commercial USB cable
(USB A/mini-B), a USB flash drive, or Ethernet, this section explains, as an example,
how to transfer screen data with a USB transfer cable (model: ZC9USCBMB1).
(1) Connect your PC and GP-4301TM with a USB transfer cable (model:
ZC9USCBMB1). If the driver of the cable has not been installed on your PC yet, a
dialog box will appear. Please follow the instructions.
NOTE
The "Hardware Installation" dialog box as follows may appear during installing
the driver of a USB depending on the security level of Windows® XP. Click
[Continue Anyway] to start installing the driver. When installation is completed,
click [Finish].
25/46